Keysight x-series Programmer's Reference

Table Of Contents
3.4.3.2 Attenuation 682
Full Range Atten 684
Mech Atten 685
Elec Atten 688
Adjust Atten for Min Clipping 691
Adjust Atten 692
Pre-Adjust for Min Clipping 692
Mech Atten Step 696
3.4.3.3 Range (Baseband Input models) 697
Range Auto/Man 697
I Range 698
Q Range 700
Q Same as I 701
3.4.3.4 Range (Non-attenuator models) 701
Range 702
Adjust Range for Min Clipping 702
Pre-Adjust for Min Clipping 702
Peak-to-Average Ratio 703
Mixer Lvl Offset 704
3.4.3.5 Signal Path 704
Presel Center 705
Preselector Adjust 706
Internal Preamp 707
LNA 709
µW Path Control 710
Allow Full Bypass in Auto 719
Software Preselection 720
SW Preselection Type 722
SW Preselection BW 722
High Freq Prefilter 723
3.4.4 BW 724
3.4.4.1 Settings 725
Digital IF BW 725
Filter Type 727
Filter BW 729
Filter Alpha 729
Channel Filter Bandwidth (Backwards Compatibility Remote Command Only) 730
3.4.5 Display 730
3.4.5.1 View 730
View 730
User View 730
Restore Layout to Default 731
Save Layout as New View 731
Re-Save User View 732
Rename User View 732
22 Vector Modulation Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)