Keysight x-series Programmer's Reference

7 Save/Recall/Print
7.3 Save
–
Electrical Atten State
–
IFGain
–
IFGainAuto
–
Internal Preamp
–
Internal Preamp Band
–
Limit
–
Limit State
–
Max Hold
–
Mechanical Atten
–
MechanicalAttenStepEnum
–
OBW Percent Pwr
–
Resolution Band Width
–
Resolution Bandwidth Shape
–
Span
–
Sweep Points
–
Sweep Time
–
Sweep Time Auto
–
TriggerSource
–
Video Bandwidth
–
x DB
The data above is followed in the file by a line containing “MeasResult1” and
“MeasResult2”. This line forms a header for each set of measurement results, which
appear in subsequent lines. Each line of Measurement Results consists of two
comma-separated values, for MeasResult1 and MeasResult2 respectively.
The MeasResult1 set in the file corresponds to the data returned by
:MEAS|:READ|:FETCh:OBWidth1, and the MeasResult2 set corresponds to the
data returned by :MEAS|:READ|:FETCh:OBWidth2.
The exported file is in CSV format, with a .csv extension.
Meas Results File Example
2372 Vector Modulation Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)