Keysight x-series Programmer's Reference

Table Of Contents
Marker Trace 756
Marker Settings Diagram 756
3.4.8 Meas Setup 756
3.4.8.1 Settings 756
Avg/Hold Number (Averaging On/Off) 757
Average Mode 757
Average Type 758
Time Avg Num 759
Meas Time 760
Sample Rate 760
Meas Setup Summary Table 761
Spur Avoidance 762
Auto Couple 765
Meas Preset 767
3.4.8.2 Advanced 767
Phase Noise Optimization 767
ADC Dither 773
LO Dither 774
IF Gain 774
IF Gain Offset 776
Other IF Gain 776
Mixing Mode 777
Invert Spectrum 779
Power Reference Plane 779
Mixing Mode State (Remote Command Only) 780
IF Frequency (Remote Command Only) 781
3.4.8.3 Global 781
Global Center Freq 781
Global EMC Std 782
Restore Defaults 783
3.4.8.4 Sample Period (Aperture) Setting (Remote Query Only) 783
3.4.9 Sweep 783
3.4.9.1 Sweep/Control 783
Restart 783
Pause/Resume 786
Sweep/Measure 786
Abort (Remote Command Only) 788
3.4.9.2 X Scale 789
Ref Value 789
Scale/Div 789
Ref Position 790
Auto Scaling 790
3.4.10 Trace 791
3.5 Channel Power Measurement 792
24 Vector Modulation Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)