Keysight x-series Programmer's Reference

Table Of Contents
3.5.7.4 Properties 874
Marker Frequency 875
Relative To 875
Marker Trace 875
Marker Settings Diagram 876
3.5.8 Meas Setup 876
3.5.8.1 Settings 876
Avg/Hold Number 876
Averaging On/Off 877
Avg Mode 877
Integ BW 878
PSD Unit 879
IF Gain 879
Spur Avoidance 880
Meas Setup Summary Table 880
Auto Couple 881
Meas Preset 882
3.5.8.2 Meas Method 883
Meas Method 883
RRC Filter Alpha 883
RRC Filter BW 884
3.5.8.3 Limits 884
Power Limit 884
PSD Limit 885
Power Limit Fail (Remote Query Only) 886
PSD Limit Fail (Remote Query only) 887
3.5.8.4 Advanced 887
Phase Noise Optimization 887
Noise Floor Extension 893
3.5.8.5 Global 897
Global Center Freq 897
Global EMC Std 898
Restore Defaults 898
3.5.9 Sweep 899
3.5.9.1 Sweep/Control 899
Sweep Time 899
Minimum Acquisition Time 901
Sweep/Measure 902
Restart 904
Pause/Resume 907
Abort (Remote Command Only) 907
Sweep Time Annotation (Remote Query Only) 908
3.5.9.2 Sweep Config 908
Sweep Time Rules 908
Vector Modulation Analyzer Mode User's &Programmer's Reference 27

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)