Keysight x-series - Page 50

Table Of Contents
Restore Defaults 1722
3.10.9 Sweep 1723
3.10.9.1 Sweep/Control 1723
Sweep/Measure 1723
Restart 1725
Pause/Resume 1727
Abort (Remote Command Only) 1728
3.10.9.2 Sweep Config 1728
Sweep Type 1728
Sweep Time Rules 1729
3.10.10 Trace 1730
3.10.10.1 Select Trace 1736
3.10.10.2 Trace Control 1736
Trace Type 1737
Clear and Write | Restart Averaging | Restart Max/Min Hold 1742
View/Blank 1742
3.10.10.3 Math 1745
Math Function 1745
Operand 1 / Operand 2 1751
Offset 1752
Reference 1752
3.10.10.4 Trace Function 1752
From Trace 1753
To Trace 1753
Copy 1753
Exchange 1754
Preset All Traces 1754
Clear All Traces 1754
3.10.10.5 Advanced 1755
Measure Trace 1755
3.11 Phase and Amplitude vs Time Measurement 1756
3.11.1 Views 1758
3.11.1.1 Normal 1758
3.11.2 Windows 1759
3.11.2.1 Graph 1759
3.11.2.2 Results 1759
3.11.3 Amplitude 1759
3.11.3.1 Y Scale 1760
Scale 1760
Ref Value 1760
50 Vector Modulation Analyzer Mode User's &Programmer's Reference