Table Of Contents
4.6.2.21 Align External Mixer Path 1919
4.6.2.22 Align Low Band 1920
4.6.2.23 Align High Band 1920
4.6.3 Path Delay Calibration 1921
4.6.3.1 Source Path Delay Calibration 1921
4.6.3.2 Path Delay Correction On/Off(Remote Command only) 1923
4.6.4 Show Alignment Statistics 1923
4.6.5 Timebase DAC 1935
4.6.5.1 Timebase DAC 1935
4.6.5.2 User Value 1936
4.6.6 Advanced 1937
4.6.6.1 Characterize Preselector 1937
4.6.6.2 Characterize Reference Clock 1939
4.6.6.3 Characterize Noise Floor 1941
4.6.6.4 Calibration Temperature History 1943
4.6.6.5 TDS Alignment 1944
4.6.6.6 Backup or Restore Align Data… 1945
Alignment Data Wizard (without Flash) 1946
Perform Backup (without Flash) (Remote Command Only) 1955
Perform Restore (without Flash) (Remote Command Only) 1955
Alignment Data Wizard (with Flash) 1956
Perform Backup (with Flash) (Remote Command Only) 1961
Perform Restore (With Flash) (Remote Command Only) 1961
Restore Alignment Defaults 1961
4.6.6.7 oGRF Preselector 1962
Align Now, 20 Hz to 30 MHz 1962
Align Now, 30 MHz to 3.6 GHz 1963
Align Now, 20 Hz to 3.6 GHz 1964
Alert 1965
4.6.6.8 Scheduler 1966
Schedule Setup 1966
Task 1966
Date/Time 1967
Hour 1968
Minute 1968
Recurrence 1968
Number of Weeks 1968
Day 1969
4.7 Licensing 1970
Vector Modulation Analyzer Mode User's &Programmer's Reference 57
To Next Page
Loading...
