Table Of Contents
6.9.1.55 Match State 2306
6.9.2 Cal Group 2307
6.9.3 Apply Cal Group 2307
6.9.4 All Apply Cal Group Off 2307
6.9.5 Connection 2308
6.10 Calibrator Control 2309
6.10.1 Select Cal Source 2309
6.10.2 Cal Output 2309
6.10.3 Cal Frequency 2310
6.10.4 Cal Signal Type 2310
6.10.5 Cal Comb Spacing 2310
6.10.6 Calibrator Reference 2311
6.11 Advanced 2312
6.11.1 T/R Port High Power Attenuator 2312
6.12 Aux I/O Control 2314
6.12.1 Data 0 – Data 7 2314
6.12.2 Aux IO Control (Remote Command Only) 2314
7 Save/Recall/Print 2315
7.1 Quick Save 2316
7.2 Recall 2319
7.2.1 Recall From File / Open 2320
7.2.2 State 2321
7.2.3 Recall Type 2322
7.2.4 Register 1 thru Register 16 2323
7.2.5 Edit Register Names 2324
7.2.6 Trace+State 2324
7.2.7 Recall To Trace 2325
7.2.8 Register 1 thru Register 16 2325
7.2.9 Edit Register Names 2326
7.2.10 Screen Config + State 2326
7.2.11 Measurement Data 2327
7.2.12 Data Type 2327
7.2.13 Trace 2327
Vector Modulation Analyzer Mode User's &Programmer's Reference 71
To Next Page
Loading...
