Keysight x-series - Page 73

Table Of Contents
7.2.47 Power Sensor Cal Factor 2345
7.2.48 Recording 2345
7.2.49 Data Type 2346
7.2.50 Channel 2347
7.2.51 Reset 2347
7.2.52 Recalled data channel table (Display only) 2348
7.2.53 Recording + State 2348
7.2.54 CC Setup 2348
7.2.55 Frame Index (.scp and .pwsg only) 2349
7.2.56 Close VSA after recall (.setx only) 2349
7.2.57 Custom IQ Constellation State 2349
7.2.58 Memory Polynomial and Volterra Coefficients Files 2350
7.2.59 Sample file 2350
7.2.60 Coefficient Lengths 2352
7.2.61 How to apply the coefficients to signal 2353
7.2.62 Loss Comp 2354
7.2.63 Data Pattern 2355
7.3 Save 2356
7.3.1 Save to File / Save As 2357
7.3.2 State 2359
7.3.3 Register 1 thru Register 16 2360
7.3.4 Edit Register Names 2360
7.3.5 Trace+State 2361
7.3.6 Save From Trace 2363
7.3.7 Register 1 thru Register 16 2364
7.3.8 Edit Register Names 2364
7.3.9 Screen Config + State 2365
7.3.10 Measurement Data 2365
7.3.11 Save From 2366
7.3.12 Data Type 2366
7.3.13 Meas Results 2367
7.3.14 CHP Meas Results File Contents 2368
7.3.15 OBW Meas Results File Contents 2371
Vector Modulation Analyzer Mode User's &Programmer's Reference 73