Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 488
Switch 3 Configuration (SISPM1040-362-LRT[W])
VLANs Port 3 Trunk Tag All 5,20
Port 4 Trunk Tag All 5,20
STP Port 3 Disable
Port 4 Disable
MEPs Instance Port VLAN MAC MEP ID Peer MAC Peer MEP ID
1 3 20 00-C0-F2-53-F0-B9 7 00-C0-F2-53-EF-FD 6
2 4 20 00-C0-F2-53-F0-BA 8 00-40-C7-1C-C7-2F 3
Note: All MEPs are programed the same under the Functional Configuration
Continuity Check
Check Enable – Priority: 7 – Frame rate: 1f/sec
APS Protocol
Check Enable – Priority: 7 – Cast: Multi – Type: R-APS
ERPS
ERPS ID Port 0 Port 1 Port 0 SF Port 1 SF Port 0 APS Port 1 APS Ring RPL Port VLAN
1 1 2 1 2 1 2 Sub Owner 1 5
To Next Page
Loading...
Need help?
General
