214603 188 Revision A
Figure 4.52: Lift Linkage
13. Move float pins from storage location (A) to engaged
position (B).
Figure 4.53: GSL
14. Start engine and press HEADER DOWN switch (A) on
ground speed lever (GSL) to lower lift arms until the
rear of the arms lift away from the linkage.
Figure 4.54: Weight Box
15. Attach slow speed transport hitch to the weight box
tongue with drawbar pin. Secure using lynch pin (A).
Attach safety chain (B).
16. Connect hitch harness (C) to electrical socket at front of
weight box.
OPERATION
To Next Page
Loading...
