Xerox Phaser 6360

1-2 Phaser 6300/6350/6360 Color Laser Printer Service Manual
General Information
Printer Introduction and Overview
The Phaser 6300/6350/6360 Color Laser Printer combines a single-pass,
tandem color laser design, with an image processor supporting PostScript 3
and PCL5c page description languages. The printer is a high performance,
Letter or A4, 25 (Phaser
6300), 36 (Phaser 6350) or 42 (Phaser 6360) page
per minute (ppm), desktop color laser printer supporting resolutions up to
2400 x 600 dots-per-inch (dpi). The printer features USB and 10/100baseT
Ethernet ports. The Phaser 6300/6350/6360 printer provides a 150-sheet
Tray 1 (MPT) from which specialty media, card stock, and envelopes are fed.
Tray 1 (MPT) also supports manual feeding. An additional tray, Tray 2 provides
550 sheets of capacity. The Output Tray holds 250 sheets facedown.
Phaser 6300/6350/6360 printer options add memory, paper capacity and
functionality. For configurations not originally equipped, an internal Hard Drive
is available for font storage, storing print files, job collation, proof, personal,
and secure print support. A selection of RAM memory upgrades are available
to raise the installed quantity to the 1 GB maximum. A 1100-Sheet Feeder is
available with two, 550-sheet universal trays. A 550-Sheet Feeder (Tray 3) is
also available. However, the installation of two 550-Sheet feeders is not
supported. One 1100-Sheet and one 550-Sheet feeder is the maximum
configuration. A Configuration Card enables Auto-duplexing (2-sided) printing.
Caution
Several electrical, chassis, and xerographic parts are unique to the 6360
model. When ordering or installing replacement parts, use the Parts Lists
in Section 9 to find the correct part number for the model being repaired.
Phaser 6360 Printer with Optional 550- and 1100-Sheet Feeders
s6360-011