Xerox Phaser 6360

Phaser 6300/6350/6360 Color Laser Printer Service Manual 8-67
Service Parts Disassembly
Xerographics
Fuser Fan (PL5.3.31)
1. Remove the Front Cover (page 8-12).
2. Disconnect the Fuser Fan connector (P/J482) and remove the harness
from the harness guide.
3. Remove two screws (self-tapping, plastic 20 mm) that secure the Fuser
Fan to the Chute Assembly Out.
4. Lift the Fuser Fan from the mounting.
Replacement Note
Replace the fan with its label facing down.
s6360-193
Label
P/J482