Xerox Phaser 6360

Phaser 6300/6350/6360 Color Laser Printer Service Manual 2-41
Theory of Operation
■ Feed Solenoid
Controls the operation (rotation/stop) of the Feed Roller Assembly by
controlling the rotations of the Gear Feed.
■ Low Paper Sensor
The actuator lowers as print media is used in the tray. When the actuator
lowers to a pre-determined position, it blocks the sensor beam to trigger a
low paper status. The actuator position can be seen from the front of the
paper tray allowing confirmation of the print media quantity.
■ Tur n R o ll er
The Turn Roller receives drive energy from the Main Drive Motor through
the Turn Clutch and transports the print media out of the paper tray to the
Registration Roller.
Xerographics
N
o
t
e
The Laser Unit used in the 6360 model is different than the Laser Unit
used in 6300/6350 models. Use care when selecting the replacement
part.
■ Developer Assemblies
The Developer Assemblies receive toner from the Toner Cartridge and
through electrostatic attraction, transfer toner to the latent image on each
of the four color drums.
s6360-062
Developer Assemblies
Developer Frame Assembly
Laser Unit
Imaging Unit
Waste Toner Reservoir