Phaser 6300/6350/6360 Color Laser Printer Service Manual 8-17
Service Parts Disassembly
Rear Cover (PL1.1.17)
The Rear Fan is attached to the Rear Cover. When removing the Rear Cover,
use care not to damage the Rear Fan harness.
o
e
On 6360 versions, the LVPS Fan is also attached to the Rear Cover.
These models have two vents as shown in the illustration.
1. Remove the Top Main Cover (page 8-11).
2. Remove the Right Side Cover (page 8-14).
3. Remove the Left Side Cover (page 8-15).
4. Unplug the Rear Fan connector (P/J166) and if present, the LVPS Fan
connector (P/J167) from the LVPS.
5. Release the 3 harness clamps to remove the fan harnesses.
6. Lift the Rear Cover slightly to release the 4 hooks and 2 tabs from the
frame and remove the Rear Cover.
s6360-129
Clamps
P/J167
P/J166
Tabs
Hooks
To Next Page
Loading...
