Xerox Phaser 6360

Phaser 6300/6350/6360 Color Laser Printer Service Manual 1-17
General Information
First Print Output Time
First Print Output Time (FPOT) is defined as a time from receipt of the print
command in Ready mode until the first page sourced from either Tray 1 or
Tray 2 is delivered to the Output Tray. Sourcing media from the optional trays
increases FPOT.
N
o
t
e
This does not include the execution times for the Boot Loader or POST
which vary depending on printer configuration.
These conditions apply to the values in the table above:
* At Fuser ready and Laser Unit Motor is rotating normally.
** At Fuser stand-by and Laser Unit Motor Off.
A4 SEF paper
Plain paper mode
Process Speed
First Print Out Time (seconds)
Simplex
6300-6350 / 6360
Duplex
6300-6350 / 6360
Laser Ready* Laser Off** Laser Ready* Laser Off**
Full 6.0 / 5.4 10.5 / 9.9 10.0 / 8.8 14.5 / 13.3
High 8.0 / 6.0 12.5 / 10.5 13.5 / 10.0 18.0 / 14.5
Mid 10.5 / 9.2 15.0 / 15.0 17.5 / 15.2 22.0 / 22.0
Low 15.0 / 13.2 19.5 / 19.5 25.5 / 21.7 30.0 / 30.0