Xerox Phaser 6360

2-6 Phaser 6300/6350/6360 Color Laser Printer Service Manual
Theory of Operation
The Developer Frame Assembly, Imaging Unit, and numbered references to
the
“Print Process Block Diagram” on page 2-2, are detailed in the following
figure.
Print-Quality Modes
There are four print-quality modes on the 6300 and 6350, three on the 6360:
:
Print-Quality Mode Description
Automatic Automatically selects the optimal print-quality mode for the
paper type selected. For example, Photo print-quality mode is
used when printing on Glossy Paper and Standard print-
quality mode is used when printing on Plain Paper. (This
setting is only available in the printer driver.)
Standard 1200 X 600 dpi resolution. High-speed, general-purpose mode
for crisp, bright, color prints. Recommended for most office
use and quick prints.
Enhanced 2400 X 600 dpi resolution. High-quality mode for fine lines and
detail. Recommended for vibrant, saturated, color prints.
Balances printing speed with quality.
Photo
(Not on 6360)
1200 X 1200 dpi resolution. Highest-quality mode for color
prints and smoothest light colors. Recommended for
photographs, smooth shaded drawings, and vibrant color.
IDT1
[(4) Primary transfer]
[(5) Secondary transfer]
IDT2
[(5) Primary transfer]
[(7) Secondary transfer]
IDT1
[(4) Primary transfer]
[(5) Secondary transfer]
IDT2 Cleaner [(8) Cleaning]
IDT1 Cleaner [(6) Cleaning]
IDT1 Cleaner [(6) Cleaning]
:RTC [(1) Changing
with electricity]
Developer Frame Assembly Imaging Unit
s6300-02
2
Developer
[(3) Development]
Drum (Y)
Drum (M)
Drum (C)
Drum (K)
:Refresher