Xerox Phaser 6360

8-84 Phaser 6300/6350/6360 Color Laser Printer Service Manual
Service Parts Disassembly
CRUM Reader (PL7.2.12)
1. Remove the Top Main Cover (page 8-11).
N
o
t
e
Control toner spillage by replacing the cartridges after removing the Top
Main Cover.
2. Remove the Right Side Cover (page 8-14).
3. Remove the Left Side Cover (page 8-15).
4. Remove the Rear Cover (page 8-17).
5. Remove the 2 wires (red) from the harness guides on the CRUM Reader.
6. Remove the screw (metal, 6 mm) and the screw (self-tapping, plastic 10
mm) that secure each end of the CRUM Reader to the frame.
7. Remove the 4 screws (self-tapping, plastic 10 mm) that secure the Toner
Cartridge Holders to the CRUM Reader.
8. Release the boss on each Toner Cartridge Holder from the CRUM
Reader.
s6360-367
HVPS