Xerox Phaser 7400 Service Manual

2-56 Phaser 7400 Color Printer Service Manual
Control Panel
The Control Panel is the primary interface to the printer’s functions and includes the
display, keypad, and status LED.
Image Processor Board
The Image Processor Board receives host data through the USB or Ethernet port. The
received data is buffered and stored, and then sent to the print engine in a rasterized
format. The Image Processor Board connects to the Engine Control Board directly.
The image processor board contains:
■ Memory - RAM
■ Flash DIMM
■ NVRAM - Control Panel and network settings.
■ Configuration Chip - determines the printer configuration.
■ Optional Hard Drive
Engine Control Board
The Engine Control Board synchronizes the print process by controlling the LED
Heads, motors, fans, sensors, solenoids, clutches and Fuser temperatures. The Engine
Control Board also controls the voltages to the Imaging Units and the print speed to
compensate for changes in media and environmental conditions.
Major Functions:
■ Communicates with the Image Processor Board
■ Receives information from the sensors and/or switches.
■ Generates the image based on information from the Image Processor Board.
■ Controls high-voltage sent to the Imaging Unit to perform charging,
development, primary and secondary transfer.
■ Distributes the low-voltage DC power from the Low-Voltage Power Supply.
Registration Sensor Board
Located in the Registration Sensor Assembly, the Registration Sensor Board includes
the two sensors that monitor color registration.
LED Relay Board
Distributes power from the LVPS to the four LED Heads.

Xerox Phaser 7400 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	600 x 1200 DPI
Time to first page (black, normal)	12 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Print speed (color, normal quality, A4/US Letter)	36 ppm
Storage media	HDD
Internal memory	512 MB
Processor model	PowerPC
Maximum internal memory	1 MB
Internal storage capacity	20 GB
Total input capacity	800 sheets
Maximum input capacity	3000 sheets
Paper tray 2 input capacity	350 sheets
Auto document feeder (ADF) input capacity	1650 sheets
Maximum print size	297 x 420 mm
Paper tray media types	Envelopes, Labels, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Letter (media size), Statement (140 x 216mm), Legal (media size)
Maximum ISO A-series paper size	A3
Power requirements	100-240V, 50/60Hz
Networking features	Fast Ethernet
Supported media weight(s)	270 g/m²
Maximum operating temperature range (T-T)	10 - 32 °C
Certification	FCC p.15 A, CE
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-4 - 140 °F
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Maximum duty cycle	150000 pages per month

Weight and Dimensions

Dimensions (WxDxH)	1438 x 623 x 975 mm