Xerox Phaser 7400

Service Parts Disassembly 8-53
Feeder Board
1. Remove the Tray 2 Feeder (page 8-38).
2. Remove 3 (metal, 10 mm) screws that secure the hand holds to the feeder.
3. Remove 1 (metal, 6 mm) screw that secures the Feeder Board Cover.
4. Remove 1 (metal, 6 mm) screw that secures the Feeder Board to the Feeder.
5. Disconnect the connectors (TRYSNS1, TRYSNS2, and PAPEND), and then
remove the board.
Hand Holds
s7400-471
Feeder Board
s7400-472