General Information 1-9
Printer Options
Phaser 7400 Color Printer options include:
■ 20 GB Hard Drive
■ Additional Memory
■ 550-Sheet Feeder (LTA)
■ 1650-Sheet Feeder (HCF)
■ Duplex Unit
■ 1,000-Sheet Finisher (with hole punch, staple, saddle-stitch, and offset)
Hard Drive
A 20 GB Hard Drive is available to enable the Job Collation, Saved Jobs, Proof,
Personal, and Secure Print options. The Hard Drive installs on the Image Processor
Board with stand-offs and connects to the board with a single data/power connector.
Hard Drive utilization appears on the Configuration page.
Additional Memory
The printer features two slots that accept 256 or 512 MB of high-speed DDR RAM.
All combinations are allowed for 256, 512, 768 MB, up to the maximum of 1 GB.
Memory modules must have the following characteristics:
■ DDR PC2700 Memory Standard
■ 200-Pin SODIMM
■ Unbuffered, Non-parity
■ Serial Presence Detect
■ 2.5 Volt
■ CL 2.5
The Startup and Configuration pages list the amount of RAM installed in the printer.
Installed memory not meeting the above specifications, is ignored by the printer.
s7400-004
To Next Page
Loading...
