Xerox Phaser 7400 Service Manual

6-8 Phaser 7400 Color Printer Service Manual
Resetting Control Panel Setup Values to Default
Resetting the Control Panel Setup values resets the Control Panel language,
brightness, contrast and accessibility controls to their default values.
1. On the Control Panel, select Printer Setup, and press OK.
2. Select Control Panel Setup, and press OK.
3. Select Reset Control Panel Setup, and press OK.
4. Select Reset Control Panel Setup NOW, and press OK to reset the defaults.
Resetting Printer Controls Values to Default
Resetting the Printer Controls values resets the startup page, power saver timeout, low
toner warning level, date and time, intelligent ready, metric defaults, and power saver
to their default values.
1. On the Control Panel, select Printer Setup, and press OK.
2. Select Printer Controls, and press OK.
3. Select Reset Printer Controls, and press OK.
4. Select Reset Printer Controls NOW , and press OK to reset the defaults.
Resetting All Printer Defaults (PostScript NVRAM)
Resetting NVRAM returns all the Image Processor Board NVRAM-stored
parameters to their factory default values. The print counts and the Adobe firmware
serial number are not affected by this reset.
1. On the Control Panel, select Troubleshooting, and press OK.
2. Select Service Tools, and press OK.
3. Select Reset NVRAM, and press OK.
4. Select Reset NVRAM and Reset Printer NOW , and press OK to reset all
the settings to their factory default values.

Xerox Phaser 7400 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	600 x 1200 DPI
Time to first page (black, normal)	12 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Print speed (color, normal quality, A4/US Letter)	36 ppm
Storage media	HDD
Internal memory	512 MB
Processor model	PowerPC
Maximum internal memory	1 MB
Internal storage capacity	20 GB
Total input capacity	800 sheets
Maximum input capacity	3000 sheets
Paper tray 2 input capacity	350 sheets
Auto document feeder (ADF) input capacity	1650 sheets
Maximum print size	297 x 420 mm
Paper tray media types	Envelopes, Labels, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Letter (media size), Statement (140 x 216mm), Legal (media size)
Maximum ISO A-series paper size	A3
Power requirements	100-240V, 50/60Hz
Networking features	Fast Ethernet
Supported media weight(s)	270 g/m²
Maximum operating temperature range (T-T)	10 - 32 °C
Certification	FCC p.15 A, CE
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-4 - 140 °F
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Maximum duty cycle	150000 pages per month

Weight and Dimensions

Dimensions (WxDxH)	1438 x 623 x 975 mm