Xerox Phaser 7400 Service Manual

Reference A-11
Service Diagnostics Menu Map (1/2)
Print Service Menu Map: Exits service diagnostics and runs
PostScript to print this menu map.
General Status: Provides current print engine status.
Engine Status
Jam Status
Engine ROM Version
Printer Configuration
Ambient Temperature/Humidity
Fuser Temperature
Consumable Status
Front Panel Control
Contrast
Intensity
Test Print: Generates print engine test prints.
Print Execute
Select Page Count
Select Test Pattern
Select Media Source
Select Color/Monochrome
Select Duplex/Simplex
Select Job Offset
Select Output Path
Finisher
Finisher Output Enabled
Finisher Offset Enabled
Finisher Inverter Enabled
Finisher Inverter Disabled
Finisher Punch Enabled
Finisher Punch Disabled
Rear Stapling Enabled
Front Stapling Enabled
Center Stapling Enabled
Saddle Stapling Enabled
Finisher Stapling Disabled
Motor/Fan Tests: Tests the functionality of motors and fans one
component at a time.
Tray Motors
Tray Feed Motors
Tray 1 Lift Motor
Tray 2 Lift Motor
Tray 3 Lift Motor
Tray 4 Lift Motor
Tray 5 Lift Motor
Tray 6 Lift Motor
Registration Motor
Imaging Unit Motors
Black IU Motor
Yellow IU Motor
Magenta IU Motor
Cyan IU Motor
Imaging Unit Up/Down Test
Transfer Belt Motor
Fuser Unit Motors
Fuser Motor Forward
Fuser Motor Release
Fuser Forward/Release
Duplex Unit Motor
Job Offset Motor
Duplex Fan
Power Supply Fan
Chassis Fan
Top Cover Cooling Fan
Belt Fan
Fuser Fan
Toner Supply Motors
Sensor/Switch Tests: Tests the functionality of sensors and
switches while service personnel manually change the state of each
device.
Interlock Switches
Top Cover Interlock
Right Door Interlocks
Left Door Switches
Tray 2 Switches
Tray 3 Switches
Tray 4 Switches
Tray 5 Switches
Tray 6 Switches
Tray 1 / MPT Tray Switches
Registration Entrance Sensor
Tray 1 Entrance Sensor
Transfer Belt Entrance Sensor
Fuser Exit Sensor
Face Down Stack Full Sensor
Face Up Stack Full Sensor
Offset Home Pos Sensor
Duplex Unit Sensors
Color Registration Sensors
Fuser Temperature Sensors
Ambient Temperature/Humidity
CMYK IU Sensors
CMYK Toner Cart Sensors
Read Fuses
YMCK Drum Phase Sensors
Paper Slack Sensor
IU Up/Down Sensor
Fuser Release Sensor
Waste Bin Missing Sensor
Belt Hole IC
Waste Toner Box Hole IC
Waste Toner Hole IC

Xerox Phaser 7400 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	600 x 1200 DPI
Time to first page (black, normal)	12 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Print speed (color, normal quality, A4/US Letter)	36 ppm
Storage media	HDD
Internal memory	512 MB
Processor model	PowerPC
Maximum internal memory	1 MB
Internal storage capacity	20 GB
Total input capacity	800 sheets
Maximum input capacity	3000 sheets
Paper tray 2 input capacity	350 sheets
Auto document feeder (ADF) input capacity	1650 sheets
Maximum print size	297 x 420 mm
Paper tray media types	Envelopes, Labels, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Letter (media size), Statement (140 x 216mm), Legal (media size)
Maximum ISO A-series paper size	A3
Power requirements	100-240V, 50/60Hz
Networking features	Fast Ethernet
Supported media weight(s)	270 g/m²
Maximum operating temperature range (T-T)	10 - 32 °C
Certification	FCC p.15 A, CE
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-4 - 140 °F
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Maximum duty cycle	150000 pages per month

Weight and Dimensions

Dimensions (WxDxH)	1438 x 623 x 975 mm