Xerox Phaser 7400 Service Manual

6-6 Phaser 7400 Color Printer Service Manual
Resetting NVRAM
Printer configuration settings are maintained in the Engine Control Board, the Image
Processor Board, and the Configuration Card.
Restore Factory Color Settings
To reset settings for density and color balance to the factory-default values:
1. On the Control Panel, select Troubleshooting, and press OK.
2. Select Print Quality Problems menu, and press OK.
3. Select Calibrate Colors menu, and press OK.
4. Select Restore Factory Settings, and press OK.
5. Select Restore Factory Settings NOW, and press OK to reset the color
settings to factory defaults.
Restore Previous Color Settings
To restore the color settings to the ones that existed before you saved the last color
balance adjustments.
1. On the Control Panel, select Troubleshooting, and press OK.
2. Select Print Quality Problems menu, and press OK.
3. Select Calibrate Colors menu, and press OK.
4. Select Restore Previous Settings, and press OK.
5. Select Restore Previous Settings NOW, and press OK to reset the color
settings to the previously set values.
Restore Factory Margins Settings
You can reset margin settings to the factory-default values.
Caution
Use caution when resetting your margins to the factory-default settings.
Changing these settings back to factory defaults may not be the last-saved
settings if you have previously calibrated your margins.
1. On the Control Panel, select Troubleshooting, and press OK.
2. Select Print Quality Problems menu, and press OK.
3. Select Calibrate Margins menu, and press OK.
4. Select Restore Factory Settings, and press OK to reset the margin settings.

Xerox Phaser 7400 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	600 x 1200 DPI
Time to first page (black, normal)	12 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Print speed (color, normal quality, A4/US Letter)	36 ppm
Storage media	HDD
Internal memory	512 MB
Processor model	PowerPC
Maximum internal memory	1 MB
Internal storage capacity	20 GB
Total input capacity	800 sheets
Maximum input capacity	3000 sheets
Paper tray 2 input capacity	350 sheets
Auto document feeder (ADF) input capacity	1650 sheets
Maximum print size	297 x 420 mm
Paper tray media types	Envelopes, Labels, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Letter (media size), Statement (140 x 216mm), Legal (media size)
Maximum ISO A-series paper size	A3
Power requirements	100-240V, 50/60Hz
Networking features	Fast Ethernet
Supported media weight(s)	270 g/m²
Maximum operating temperature range (T-T)	10 - 32 °C
Certification	FCC p.15 A, CE
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-4 - 140 °F
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Maximum duty cycle	150000 pages per month

Weight and Dimensions

Dimensions (WxDxH)	1438 x 623 x 975 mm