Xerox Phaser 7400

8-108 Phaser 7400 Color Printer Service Manual
Imaging Unit Lift Uplink
The Imaging Unit lift mechanism uses two Lift Uplinks, front and back, to lift the
color Imaging Units away from the Transfer Unit belt during monochrome printing.
Rear Lift Uplink
1. Remove the Imaging Unit Sensor Board (page 142).
2. Remove the Registration Assembly (page 84).
3. Release the hook and 4 tabs that secure the Lift Uplink Cover to the frame, and
then remove the cover.
4. Move the Lift Uplink to the right to clear the gear set, and then remove the Lift
Uplink.
Imaging Unit Lift Uplink
Lift Uplink Cover
s7400-582