Xerox Phaser 7400

3-152 Phaser 7400 Color Printer Service Manual
Motor Driver Board Firmware Error
Applicable Status Code:
Code 225: Motor Driver Board Flash Memory software error.
Initial Actions:
■ Cycle the printer's power.
■ If the problem persists follow the procedure below.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack References
■ Motor Driver Board, PL2.1.10 ■ Print Engine Map 5 (page 10-8)
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1
Check the connections to the Engine
Control Board.
Are DV0 and DV1 completely connected?
Replace the Motor
Driver Board
(
page 8-141).
Connect the two
ribbon cables.