E5071C
104
• It is also possible to turn off the display of graticule labels. For
details, refer to Turning_off_the_display_of_graticule_labels.
Manual scale adjustment on the Smith chart/polar format
Manual scale adjustment on the Smith chart format or the polar format is
done by using the displacement (Scale/Div of the outermost circle).
Manually setting scales on the Smith chart/polar format
1. Press Channel Next/Channel Prev keys and Trace Next/Trace prev keys
to select the trace for which the scale will be adjusted.
2. Press Scale key.
3. Click Scale/Div, then input the displacement of the outermost circle.
Setting the value of a reference line using the marker
When using a rectangular display format, it is possible to change the
reference line value to be equal to the response value of the active marker
on the active trace.
Setting the reference line value using the marker
1. Place the active marker on the active trace on the position that
corresponds to the new reference line value.
2. Press Scale or Marker Fctn key.
To Next Page
Loading...
Need help?
General
