Programming
971
Control using C or Visual Basic
You can control the E5071C by programming using SICL with the C
language in the UNIX environment, or Visual C++ or Visual Basic in the
Windows environment.
Control using Agilent VEE
Agilent VEE allows you to control the E5071C via the I/O interface. The
following example shows how to control the E5071C that is set as follows:
the address of the SICL-LAN server is 17 and the IP address is
146.208.116.90.
• When using Agilent VEE for PC, use Agilent VEE Pro 7.5 for
Windows or later.
To Next Page
Loading...
