E5071C
850
11. Press System > Firmware Revision to confirm the firmware
revision you have just installed.
Installing E5071C-TDR Option
1. Download the latest TDR software from the
http://www.agilent.com/find/ena_firmware.
2. Download the execution file (E5071C_opt_TDR_xx.xx.exe).
3. Ensure that you have updated the E5071C firmware.
4. Press System > Service Menu > EXIT to exit the E5071C
measurement application.
5. Run the E5071C_opt_TDR_xx.xx.exe to extract the
E5071C_opt_TDR.msi.
6. If you use your local PC to download, save the file to a USB mass
storage device in order to move it to E5071C. Connect the USB mass
storage device into the front USB port of the E5071C.
7. Copy or move the E5071C_opt_TDR.msi file to D drive.
8. Double-click E5071C_opt_TDR.msi.
9. If you are installing for the first time, select Install Option TDR on
E5071C Instrument (default).
10. Follow the instruction of window installer.
11. After the installation is finished, double-click the Network
Analyzer icon on the desk top to restart the E5071C firmware.
12. Click About E5071C-TDR button in E5071C-TDR option tool bar to
confirm the option revision you have just installed.
To Next Page
Loading...
Need help?
General
