Agilent Technologies E5071C User Manual

Measurement
369
Setting up smoothing
Set up the smoothing operation by following the steps below:
1. Press Channel Next/Channel Prev keys and Trace Next/Trace prev keys
to activate the trace on which smoothing will be defined.
2. Press Avg key.
3. Click Smo Aperture, then change the smoothing aperture (%) in the
data entry area.
4. Click Smoothing to turn ON smoothing.

Agilent Technologies E5071C Specifications

General

Brand	Agilent Technologies
Model	E5071C
Category	Measuring Instruments
Language	English