E5071C
950
Configuring Network
• When you use the E5071C by connecting it to your LAN, consult
your network administrator and make the setting of the LAN
correctly.
This section describes how to set the following basic items necessary to
connect the E5071C to the LAN (Local Area Network).
• Enabling/Disabling network
• Check/Reset IP Address
• Setting IP address
• Specifying computer name
If you need detail network settings, consult your network administrator
and perform operation in the same way as the Windows PC.
Other topics about Using Windows
Enabling/Disabling Network
You can enable/disable the network connection function of the E5071C.
To enable/disable the network connection function
1. Use the LAN cable to connect the E5071C to the LAN.
2. Press System > Misc Setup > Network Setup > Network Configuration
to open Network Connections window.
3. Perform either of the following:
• When switching from disable to enable:
Double-click the Local Area Connection icon in the Network Connections
window to enable the network connection function.
• When switching from enable to disable:
Double-click the Local Area Connection icon in the Network Connections
window. The Local Area Connection Status screen appears. Click the
Disable button to disable the network connection function.
4. Close Network Connections window.
Check/Reset IP Address
The IP address of the E5071C can be checked/reset by System > Misc
Setup > Network Setup > LAN Dialog.
Setting IP address
To Next Page
Loading...
Need help?
General
