Measurement
269
Setting Point Trigger
• Overview
• Setting Point Trigger
Other topics about Making Measurement
Overview
The point trigger provides a point measurement at every trigger, and it can
be used to change the trigger event to point trigger mode.
Trigger event
name
Function
On Point (On)
Point measurement is performed when trigger is
applied.
On Sweep (Off)
Measurement is performed for all measurement
points when trigger is applied.
• When the trigger source is selected as the internal trigger, the
point trigger does not work.
Setting Point Trigger
1. Press Trigger key.
2. Click Trigger Event.
3. Click the softkey that corresponds to the desired trigger event.
Softkey Function
On Point
Measures at each measurement point
On Sweep
Measures all measurement points
To Next Page
Loading...
Need help?
General
