Using this Help
3
Opening E5071C Help
This help system is provided in Microsoft Compressed HTML Help format
(ENA_C_Help.chm). This help can be also be viewed on a normal PC.
To open E5071C help, use either of the following methods:
• By pressing the Help key located in the ENTRY Block.
• By pressing the F1 key on a keyboard attached with the E5071C.
• By double-clicking ENA_C_Help.chm (located in D:\Agilent\Help).
Closing E5071C Help
To close the E5071C help, click , located on the top right of the E5071C
help viewer.
Viewing E5071C Help on your PC
The E5071C help can be opened and viewed on a normal PC. The help file
(ENA_C_Help.chm) is located in the E5071C Network Analyzer hard disk at
D:\Agilent\Help. Copy it to a local hard disk drive on your PC, then double-
click it to view.
Context Sensitive Help
Context sensitive help is a special feature of the E5071C help in firmware
revision A.08.0x or later. It allows User to get information about the
selected softkey by pressing the Help key in the E5071C or by pressing F1
in a keyboard attached to the E5071C or by clicking the help button in a
dialog box. This special feature is known as context sensitive help as User
receive information quickly depending upon which area the user is working,
in the firmware of the E5071C. It provides information relevant to the task
that needs to be accomplished and reduces the time to search relevant
information required to complete a task.
Switching between E5071C Help and Measurement View
The Focus Key, located in the Entry Block, can be used to switch between
the E5071C Measurement View and Help View.
Navigating E5071C Help
To Next Page
Loading...
Need help?
General
