Using Windows
955
Disabling-Enabling USB Mass Storage Device
You can disable/enable any USB-compatible external mass storage devices
in order to ensure confidentiality or for other reasons.
• To disable a USB Mass Storage Device
• To enable a USB Mass Storage Device
• To disable write access to USB Mass Storage Device
Other topics about Using Windows
To disable a USB Mass Storage Device
1. Press Save/Recall key.
2. Press Explorer....and navigate to D:\Agilent\Service.
3. Double-click DisableUsbStorage.exe
4. Click OK in the SUCCEEDED message window that appears. If any
USB mass storage device is connected to the E5071C under this
condition, the Hardware Wizard will start, but the USB mass storage
device will not work.
To enable a USB Mass Storage Device
1. Press Save/Recall key.
2. Press Explorer....
3. Double-click EnableUsbStorage.exe from D:\Agilent\Service.
4. Click OK in the SUCCEEDED message window that appears.
5. If you do not want any USB mass storage device to ever be
enabled at any time, delete EnableUsbStorage.exe from the
E5071C after DisableUsbStorage.exe has been completed.
These two programs will not be recovered automatically by
applying the firmware update or other such action. Before
deleting any of these programs, you should make a backup copy
to a recording medium such as a USB memory and store it
separately.
6. If the program fails to run, it is possible that you have not
logged in as a user in the Administrators Group. When you want
to execute any of the above programs, make sure to log in as a
user in the Administrators Group.
To disable write access to USB Mass Storage Device
To Next Page
Loading...
Need help?
General
