E5071C
900
Important Functional Differences
This section describes the key differences between the Agilent 8753ES and
Agilent E5071C.
• Channel and Trace Concepts
• Measurement Parameters
• Test Port Output Ranges
• Sweep Function
• Calibration
• Trigger System
• Data Flow
• Reading/Writing Data
• Screen Display and Marker Functions
• Math Operation Functions on Traces
• Device Test Functions
• Analytical Functions
• Save/Recall
• Test Sequence Program
• Outputting to a Printer/Plotter
• GPIB Interface
• LAN Interface
• Other Functions
Other topics about Replacing 8753ES with E5071C
Channel and Trace Concepts
In the 8753ES, channels 1 and 2 are independent from each other and
have auxiliary channels, channels 3 and 4, respectively. Channels 3 and 4
can be displayed as additions to channels 1 and 2, respectively. This allows
up to four channels to be displayed for up to four traces on the screen
simultaneously. Channels 1 and 3 and channels 2 and 4 are always
coupled, while channels 1 and 2 are independent from each other. This
enables you to specify different sweep conditions on each of channels 1
and 2. The E5071C has 4, 9 , 12, 16 and 36 independent channels, each of
which allows sweep conditions to be defined different from those on other
channels. On the screen you can open up to maximum 36 windows for
To Next Page
Loading...
