Using Windows
953
5. C_NAME in the network path is the computer name of the
E5071C and S_NAME is the share name of the D drive. For
information on how to set the computer name, refer to
Specifying computer name; for information on how to set the
share name, refer to Enabling the access from an external PC.
6. The user name and password differ depending on the setting
made when enabling access from the external PC. When you
have set them according to Enabling the access from an
external PC you can make connection using the user name,
agena, without the password.
E5071C Hard Disk Drive
The E5071C Hard disk contains several memory partitions. The following
table explains the different partitions of the E5071C.
Drive Description
CNxxx (C:)
The system drive is replaced with the original image
when system recovery is executed.
USER (D:)
User can keep their files, in this drive. This drive is not
replaced even when system recovery is executed.
RECOVERY
(E:)
This drive contains license information and back up data
for syscal. Also,user can keep their files, in this drive.
The drive is not replaced even when system recovery is
executed.
SWAP (F:)
This folder is for system recovery. User cannot use this
drive.
To Next Page
Loading...
Need help?
General
