E5071C
780
TDR Error Message
TDR Error Messages
An error message is displayed on a dialog box. In E5071C-TDR application
on PC (remote control), the error message is displayed at the Error
Message area of the application.
An error with a positive error number is one uniquely defined for this
instrument. On the other hand, an error with a negative error number is
basically one defined for common GPIB devices in IEEE488.2
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
B
No. Message Description
-
168
Block
data not
allowed
An block-data element has been received at a
position where this instrument does not accept
one.
C
No. Message Description
-
148
Character
data not
allowed
A character data element (not violating the
standard) has been received at a position where
this instrument does not accept one. Double
quotes (") are omitted where it is necessary to
place a parameter in double quotes ("), for
example.
-
100
Command
error
A comprehensive syntax error has occurred
showing that this instrument cannot detect a more
detailed error. This code simply shows that a
command error defined in 11.5.1.1.4, IEEE488.2
has occurred.
D
No. Message Description
-
222
Data out
of range
A data element (not violating the standard)
outside the range defined by this instrument has
been received. This error occurs when an integer-
based command for which the parameter can be
To Next Page
Loading...
Need help?
General
