Product Information
869
System Verification Result
The type of output for the Verification result can be selected under Outputs
in the Run tab. Use these printouts to determine whether your measured
data falls within the total uncertainty limits at all frequencies.
The result includes the following items:
Tabular Data
1. Header information
• E5071C: model number, serial number, verification test time
and day
• Calibration Kit: model number, (serial number)
• Verification Kit: model number, (serial number)
• Measured device, Parameter
2. Data for each test point
• Frequency
To Next Page
Loading...
Need help?
General
