Measurement
249
5. The following dialog appears. Click OK.
When more than 1601 measurement points is set for 1 channel and
4 traces, the E5071C VBA macro function may take more time to
operate.
Vector Mixer Characterization Macro
3. Selecting Measurement Port
Select the 1-port calibration port (1 in menu).
• Select any port if full 2-port calibration is set.
4. Setting IF Frequency
Select IF frequency from RF+LO, RF-LO and LO-RF (2 in menu), depending
on the IF frequency of the calibration mixer.
• The number displayed in the Vector Mixer Characterization
macro is the frequency set in the E5071C and read from it. You
To Next Page
Loading...
