Product Information
779
found the tracking turned on, the target specified by
the marker search has not been found by the
time the sweep is finished (with the tracking
executed).
This warning message is displayed also when,
with the bandwidth marker displayed, the
setting for the bandwidth marker is changed at
the end of the sweep, or when, with the active
marker changed or moved, the bandwidth is
not found.
Transform, Gate not
allowed
This message appears when you have set the
measurement points to two, sweep type to
other than linear sweep, or frequency offset to
enabled, while the gating/conversion function
of the time domain feature is turned on.
If this message is displayed, the
gating/conversion function is automatically
turned off.
User Preset File not
found
This warning message is displayed if no user
preset file (D:\UserPreset.sta) exists when
executing the SYST:UPR command.
If this message is displayed, a normal preset
(SYST:PRES) will be performed.
To Next Page
Loading...
Need help?
General
