E5071C
784
parameter required for the command, or the
parameter has not been entered. For
example, the command
"SENS:AVER:COUN" requires one more
parameter.
Therefore, when a message
"SENS:AVER:COUN" is sent to a correct
program message "SENS:AVER:COUN 16"
this instrument receives the former
message as an invalid one because all
parameters have not been entered. Enter
command parameters correctly.
N
No. Message Description
-120
Numeric data
error
An error resulting from the numeric value
data (including numeric value data having
no decimal point representation) has
occurred. A numeric value error other than
Errors -121 through -129 has occurred.
-128
Numeric data
not allowed
An numeric-value-data element (not
violating the standard) has been received
at a position where this instrument does
not accept one.
O
No. Message Description
-225 Out of memory
Insufficient memory is available in this
instrument to perform the required
operation.
P
No. Message Description
-220
Parameter
error
When a parameter-related error other
than Errors -221 through -229 occurs,
that error is displayed.
-108
Parameter not
allowed
The number of parameters exceeds that
required for the command.
For instance, when a program message
To Next Page
Loading...
Need help?
General
