Agilent Technologies E5071C

Measurement
111
Calibration
Calibration
Overview
 Measurement Errors and their Characteristics
 Calibration Types and Characteristics
 Checking Calibration Status
 Clear Calibration
Basic Calibration
 Selecting Calibration Kit
 OPEN/SHORT Response Calibration (reflection test)
 THRU Response Calibration (transmission test)
 Enhanced Response Calibration
 1-Port Calibration (reflection test)
 Full 2-Port Calibration
 Full 3-Port Calibration
 Full 4-Port Calibration
Calibration with ECal (Electronic Calibration)
 ECal (Electronic Calibration)
 ECal Driver Installation
 1-Port Calibration Using a 2-Port ECal Module
 Calibration Using 4-port ECal
If you have 2 port Ecal:
 Full 2-Port Calibration Using the 2-Port ECal Module
 Full 3-Port and Full 4-Port Calibration using 2-Port ECal
Advanced Calibration with ECal
 Improving Calibration Accuracy along with ECal
 Confidence Check on Calibration Coefficients Using ECal
 Turning off ECal Auto-detect Function
 User-characterized ECal
Advanced Calibration
 Setting the Trigger Source for Calibration
 Sliding Offset and Load Calibration