Agilent Technologies E5071C

Programming
1397
1490| Dmy = SCPI.IEEE4882.OPC
1500| Else
1510| GoTo Cal_Start
1520| End If
1530|
1540| Buff = MsgBox("Connect the Short standard to Port " & CStr(Port(I - 1)) & ".", _
1550| vbOKCancel, "Full" & SoltType & "-port calibration")
1560| If Buff = vbOK Then
1570| SCPI.SENSe(Chan).CORRection.COLLect.ACQuire.Short = Port(I - 1)
1580| Dmy = SCPI.IEEE4882.OPC
1590| Else
1600| GoTo Cal_Start
1610| End If
1620|
1630| Buff = MsgBox("Connect the Load standard to Port " & CStr(Port(I - 1)) & ".", _
1640| vbOKCancel, "Full" & SoltType & "-port calibration")
1650| If Buff = vbOK Then
1660| SCPI.SENSe(Chan).CORRection.COLLect.ACQuire.Load = Port(I - 1)
1670| Dmy = SCPI.IEEE4882.OPC
1680| Else
1690| GoTo Cal_Start
1700| End If
1710| Next I
1720|
1730| For I = 1 To SoltType - 1
1740| For J = I + 1 To SoltType
1750| Buff = MsgBox("Connect the Thru standard between Por t " & CStr(Port(I - 1)) & _
1760| " and Port " & CStr(Port(J - 1)) & ".", vbOKCancel, "Full" & SoltType & "-port calibration")
1770| If Buff = vbOK Then
1780| SCPI.SENSe(Chan).CORRection.COLLect.ACQuire.THRU = Array(Port(I - 1 ), Port(J - 1))
1790| Dmy = SCPI.IEEE4882.OPC
1800| SCPI.SENSe(Chan).CORRection.COLLect.ACQuire.THRU = Array(Port(J - 1 ), Port(I - 1))
1810| Dmy = SCPI.IEEE4882.OPC
1820| Else
1830| GoTo Cal_Start
1840| End If
1850| Next J