Agilent Technologies E5071C

E5071C
1412
1870| Buff = MsgBox("Connect the Short standard to Port " & C Str(Port(I - 1)) & ".", vbOKCancel, "Full"
& SoltType & "-port calib ration")
1880| If Buff = vbOK Then
1890| SCPI.SENSe(Chan).CORRection.COLLect.ACQuire.Short = Port(I - 1)
1900| Dmy = SCPI.IEEE4882.OPC
1910| Else
1920| GoTo Cal_Start
1930| End If
1940|
1950| Buff = MsgBox("Connect the Load standard to Port " & CS tr(Port(I - 1)) & ".", vbOKCancel, "Full" &
SoltType & "-port calibr ation")
1960| If Buff = vbOK Then
1970| SCPI.SENSe(Chan).CORRection.COLLect.ACQuire.Load = Port(I - 1)
1980| Dmy = SCPI.IEEE4882.OPC
1990| Else
2000| GoTo Cal_Start
2010| End If
2020| Next I
2030|
2040| For I = 1 To SoltType - 1
2050| For J = I + 1 To SoltType
2060| Buff = MsgBox("Connect the Thru standard between Por t " & CStr(Port(I - 1)) & " and Port " &
CStr(Port(J - 1)) & ".", vb OKCancel, "Full" & SoltType & "-port calibration")
2070| If Buff = vbOK Then
2080| SCPI.SENSe(Chan).CORRection.COLLect.ACQuire.THRU = Array(Port(I - 1), Port(J - 1))
2090| Dmy = SCPI.IEEE4882.OPC
2100| SCPI.SENSe(Chan).CORRection.COLLect.ACQuire.THRU = Array(Port(J - 1), Port(I - 1))
2110| Dmy = SCPI.IEEE4882.OPC
2120| Else
2130| GoTo Cal_Start
2140| End If
2150| Next J
2160| Next I
2170|
2180| If SoltType <> 1 Then
2190| Buff = MsgBox("Do you measure the Isolation (Optional)? ", vbYesNo, "Full" & SoltType & "-port
calibration")
2200| If Buff = vbYes Then