Agilent Technologies E5071C User Manual

E5071C
206
• Click Receiver Calibration > Calibrate R to calibrate the
receiver end only.
• When Calibrate R is selected, the Select Port setting is used and
the Source Port setting is ignored.
• Click Receiver Calibration > Calibrate T to calibrate the
transmitter end only.
• When Calibrate Both or Calibrate T is selected, the source port
should be different from measurement port.

Agilent Technologies E5071C Specifications

General

Brand	Agilent Technologies
Model	E5071C
Category	Measuring Instruments
Language	English