Programming
2791
:CALCulate:EYE:EXECute
Type
Command Only
Syntax
:CALCulate:EYE:EXECute
Description
This command performs the calculation for the simulated eye diagram for
the active trace.
Examples
10 OUTPUT 717;":CALC:EYE:STAT ON"
20 OUTPUT 717 ":CALC:ATR:ACT 3"
30 OUTPUT 717;":CALC:EYE:EXEC"
Related Commands
:CALCulate:EYE:STATe
:CALCulate:ATRaces:ACTive
:CALCulate:EYE:ABORt
Equivalent Key
Eye/Mask > Draw Eye (Under Eye Control)
To Next Page
