Agilent Technologies E5071C - Page 2640

Programming
2867
:SENSe:CORRection:DCONstant
Type
Command/Query
Syntax
:SENSe:CORRection:DCONstant <numeric>
:SENSe:CORRection:DCONstant?
Description
This command sets dielectric constant value.
Parameter
Description Dielectric constant value
Data Type Double precision floating point type (Double)
Range 10m to 100
Preset Value 1000m
Unit -
Resolution -
Query Response
{numeric} <newline><^END>
Examples
10 OUTPUT 717;":SENS:CORR:DCON 0.01"
20 OUTPUT 717;":SENS:CORR:DCON?"
30 ENTER 717;A
Related Commands
:SENSe:CORRection:RIMPedance
Equivalent GUI
Setup > Dielectric Const. (under More Functions)