Agilent Technologies E5071C

Measurement
395
The measurement conditions are determined for each frequency range.
Here, the segment sweep is performed following the sweep conditions
shown in the following table.
Frequency Range Measurement Conditions
Start Stop Number of Points IF Bandwidth
440 MHz
915 MHz
(Marker 1)
47 70 kHz
915 MHz
(Marker 1)
980 MHz
(Marker 2)
130 100 kHz
980 MHz
(Marker 2)
1.035 GHz
(Marker 3)
55 70 kHz
1.07 GHz
(Marker 4)
2 GHz
(Marker 5)
93 70 kHz
2.6 GHz
(Marker 6)
3 GHz 41 70 kHz