E5071C
458
• Select Port 1 Z0 Real and Port 1 Z0 Imag, Port 2 Z0 Real and Port2
Z0 Imag, Port 3 Z0 Real and Port 3 Z0 Imag, or Port 4 Z0 Real and
Port 4 Z0 Imag to set the port reference impedance in Complex
format.
3. Click Port Z Conversion to change the port impedance conversion
function to the ON state.
4. Click Return.
5. If Fixture Simulator is OFF, click the key again to turn it ON.
To Next Page
Loading...
