Product Information
765
Ensure the connection of USB/GPIB
interface and its setting.
52
No valid
memory trace
This error occurs when you have executed
either DISP:WIND:TRAC:MEM ON
command to display memory trace, or any
other command to enable data calculation
using memory trace (CALC:MATH:FUNC
command with other than NORM is
specified), though no valid data exists in
memory trace. This error is not generated
by front key operations.
-120
Numeric data
error
An error resulting from the numeric value
data (including numeric value data having
no decimal point representation) has
occurred. A numeric value error other than
Errors -121 through -129 has occurred.
-128
Numeric data
not allowed
An numeric-value-data element (not
violating the standard) has been received
at a position where this instrument does
not accept one.
O
No. Message Description
200
Option not
installed
The command received has been ignored
because of the mismatch between the
contents of an option for this instrument
and the command.
It also occurs when you try to enable the
time domain function in a model not
having the time domain option. This holds
true for the frequency offset option.
This error is not generated by front key
operations.
-225 Out of memory
Insufficient memory is available in this
instrument to perform the required
operation.
P
No. Message Description
To Next Page
Loading...
Need help?
General
