Product Information
903
Type of calibration
kit
8753ES E5071C
7 mm • 85031B • 85031B
• 85050C/D
3.5 mm • 85033C/D/E • 85033D/E
• 85052D
N type
• 50 ohm :
85032B/E/F
• 75 ohm :
85036B/E
• 50 ohm :
85032B/F
• 75 ohm :
85036B/E
2.4 mm • 85056A/D N/A
TRL 3.5 mm • 85052C • 85052C
Others
User-defined
calibration kit
User-defined
calibration kit
The 8753ES allows only one type of user-defined calibration kit to be saved
in the internal memory. Up to 15 classes can be set up when defining
calibration kits, including 12 classes (isolation included) to be used for full
2-port calibration and three calibration classes (THRU, reflect, and
line/match for TRL*/LRM* calibration. A maximum of seven standards can
be defined for each calibration class.
In contrast, the E5071C allows 20 types of user-defined calibration kits to
be saved in the internal memory, which include the nine calibration kits
registered beforehand. When setting up calibration classes, OPEN, SHORT,
and LOAD can be set up on each port and THRU between ports. Eight
standards are allowed for each calibration class.
ECal
Both the 8753ES and E5071C support ECal measurement. However, each
supports slightly different functions. The 8753ES supports enhanced
response calibration, 1-port calibration for S11 and S22, and full 2-port
calibration. The E5071C provides multi-port calibrations including enhanced
response calibration, 1-port calibration for S11 and S22, full 2-port
calibration, full 3-port calibration (with 4 ports model) and full 4-port
calibration (with option 4 ports model).
To Next Page
Loading...
Need help?
General
